This is the old SliTaz forum - Please use the main forum.slitaz.org

mojo

Estonian keyboard layout in Slitaz?
Something is broken on your system. There is a receipt for xorg-setxkbmap which indicates it was installed. But tazpkg check indicates there is no /usr/bin/setxkbmap :( I would verify there is no /usr/bin/setxkbmap which setxkbmap should return…

Comment by mojo February 2011 permalink
Estonian keyboard layout in Slitaz?
Install xorg-setxkbmap.tazpkgOpen terminal as root:# setxkbmap eeTest,is this the right keymap?Yes, then add the bold to /etc/X11/xorg.confSection "InputDevice" Identifier "Keyboard0" Driver "kbd" …

Comment by mojo February 2011 permalink
SliTaz and Windows Networking
@FXI have had no problem with cifs mounting of username/password protected shares on Windows 7 with cooking.There is a 4th step you left out of slitaz-3.0/cooking smbfs mount setup.# modprobe cifsAdd cifs to LOAD_MODULES of /etc/rcS.conf to autoload…

Comment by mojo February 2011 permalink
There is no Module ?
This is what you should see on updated cooking:uname -aKernel: Linux slitaz 2.6.37-slitaz #2 SMP Tue Jan 25 02:32:32 CET 2011 i686 GNU/Linuxmodprobe -lModules: /lib/modules/2.6.37-slitaz/kernel/drivers/Kernel version must match the modules version. …

Comment by mojo February 2011 permalink
gnome-games
Post the names of the games.

Comment by mojo February 2011 permalink
There is no Module ?
This will fix the problem.# tazpkg recharge# tazpkg upgrade

Comment by mojo February 2011 permalink
There is no Module ?
# tazpkg get-install linux-wireless.tazpkgNow you should see entry in wireless manager/drivers tab Module: Depending on your wireless chip you may need to install firmware.If your ethernet works you can install Firmware: Post the output from lspci -…

Comment by mojo February 2011 permalink
Where is the floppy boot disk?
http://www.slitaz.org/en/get/index.html#floppy

Comment by mojo February 2011 permalink
install equinox gtk engine
Make is a program which in slitaz is installed with slitaz-toolchain.tazpkg Equinox gtk engine is for metacity/gnome. Slitaz is small lightweight fast, it has no metacity/gnome.

Comment by mojo February 2011 permalink
define shell profile for root
@Trixar_za My mistake was using login command :P When I'm logged in with slim as user tux joe_2000 login directions for root shell works in xterm. I have sudo installed with NOPASSWD, it skips the password prompt,goes straight to root promp…

Comment by mojo February 2011 permalink
define shell profile for root
slitaz-3.0 or cooking: Can't login to root from xterm(Login incorrect),have to use sudo su but alias doesn't work. Login for tux or another regular user works from xterm Adding alias to /root/.profile only works after login root from cons…

Comment by mojo February 2011 permalink
get-xlite returns HTTP/1.1 403 Forbidden [SOLVED]
@ms3811tank.slitaz.org which runs the entire network except forum lost it's free hostingcurrently it is being relocated and setup elsewherehow long this will take is anyones guess

Comment by mojo February 2011 permalink
How to get flash in midori
Remember this: http://forum.slitaz.org/index.php?p=/discussion/comment/11836/#Comment_11836

Comment by mojo February 2011 permalink
After Upgrade to Cooking(to solve geeqie issue), My mouse can not move
This grub2(installed to usbkey MBR) isoboots /boot/slitaz/slitaz-3.0.iso on same usbkey: menuentry "SliTaz-3.0.iso" { loopback loop /boot/slitaz/slitaz-3.0.iso linux16 (loop)/boot/bzImage initrd16 (loop)/boot…

Comment by mojo February 2011 permalink
get-xlite returns HTTP/1.1 403 Forbidden [SOLVED]
Open /usr/bin/get-xlite in a text editor.Do a google search for URL of a valid download server for X-Lite_Install.tar.gzReplace whats in bold with the new URLURL="http://counterpath.s3.amazonaws.com/downloads/X-Lite_Install.tar.gz"Save and…

Comment by mojo February 2011 permalink
How to setup graphics card in Slitaz Cooking 2.6.34
# tazpkg recharge # tazpkg upgrade

Comment by mojo February 2011 permalink
Can't run XServer on slitaz cooking version
Use the same graphics chip specific driver that works in slitaz-3.0 or lspci command to determine your VGA adapter chip and get it from the cooking repository. Kill X with ctrl+alt+bkspace if you can't reboot with bootcode screen=text Login a…

Comment by mojo February 2011 permalink
[Bug] netbox doesn't update network.conf
The location to edit network.conf is from Netbox/Configuration tab/Network :Click the edit button on the right,leafpad opens /etc/network.conf , make your changes,save,and close. There is a ->Change button you click to save if it's a fill in…

Comment by mojo February 2011 permalink
Pentium 4 and cpu_freq troubles
@kultexNo worry :)It's works for kultex and mojo ! modprobe cpufreq_powersave if cpufreq-set -g powersaveCONFIG_CPU_FREQ_GOV_POWERSAVE=mNo modprobe if cpufreq-set -g ondemandCONFIG_CPU_FREQ_GOV_ONDEMAND=ytux@slitaz:~$ sudo cpufreq-set -c 0 -g …

Comment by mojo February 2011 permalink
Pentium 4 and cpu_freq troubles
Confirmed this feature works with Linux slitaz 2.6.37-slitaz #2 SMP Tue Jan 25 02:32:32 CET 2011 i686 GNU/Linux with driver: acpi-cpufreq on an E4500 core2duo with a gigabyte EP45-UD3LR motherboard . If someone else has a pentium 4 that use the p…

Comment by mojo February 2011 permalink
[HELP] Install Chromium
#tazpkg get-install get-google-chromefollowed by#get-google-chrome

Comment by mojo February 2011 permalink
Slitaz-3.0 New user login is FIXED
Bug #343 is 100% Done,Status Closedhttp://labs.slitaz.org/issues/343#change-854

Comment by mojo January 2011 permalink
kompozer - unknown trouble
kompozer is a bash startup script,not the binarie executable.ldd /home/tux/kompozer.08b/kompozer-binCooking was missing 3 libraries that were in the kompozer folder. Copy to /usr/lib ran ldconfig as root. Recheck ldd , no missing libs.kompozer won&#…

Comment by mojo January 2011 permalink
Flash player
Verify flash is installed:tux@slitaz:~$ ls /usr/share/flash libflashplayer.so1.Full install of slitaz:Add to ~/.profile for each userexport MOZ_PLUGIN_PATH="/usr/share/flash"2 Frugal/live install to hard drive/usb key/sd cardAdd to ~/.p…

Comment by mojo January 2011 permalink
HW trouble - WG511 - "p54pci not found"
Did you try add blacklist.conf to /etc/modprobe.d ?orEvery module you may need load on boot:/etc/rcS.conf LOAD_MODULES=

Comment by mojo January 2011 permalink
kompozer - unknown trouble
slitaz-3.0 install with thunderbird seamonkey and firefox installedInside kompozer folder double click kompozer In terminal ./kompozer enterProgram starts.slitaz-cooking-core fresh install with no mozilla products installed:Version 0.8b3 wouldn'…

Comment by mojo January 2011 permalink
Installing PCMCIA Micronet SP160T V2 Ethernet Adapter
Post output from: lsmod lspci lspci -n ifconfig

Comment by mojo January 2011 permalink
Installing PCMCIA Micronet SP160T V2 Ethernet Adapter
Install pcmciautils.tazpkg modprobe pcmciaWith ethernet adapter plugged in use pccardctl status , pccardctl ident, pccardctl info ,pccardctl eject ,pccardctl insert commands. Give us whatever info you can from above commands or applicable errors fro…

Comment by mojo January 2011 permalink
mirror.slitaz.org troubles
Next time you get the error: "wget: bad address 'mirror.slitaz.org'"Open xterm: tux@slitaz:~$ nslookup mirror.slitaz.orgChange to another dns server if it returns:nslookup: can't resolve 'mirror.slitaz.org'This is …

Comment by mojo January 2011 permalink
Looking for list of packages
http://mirror.slitaz.org/packages/1.0/

Comment by mojo January 2011 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: mojo
Joined: January 2010
Visits: 1,314
Last Active: December 2021
Roles: Member

SliTaz Forum

This is the old SliTaz forum - Please use the main forum.slitaz.org

mojo

Howdy, Stranger!

About

SliTaz Network

SliTaz Social