thanks for the reply, yrjhjjuk.

I don't understand how linking the packages will help me with my ethernet?

Broadcomm b44 depends on ssb. bc-wl conflicts with ssb.try b43 instead.
Open xterm

subox tazctrlbox

Initialization tab,Load modules:, add/remove module name, click Change button,Exit, reboot
Please post the output from:

lspci

if you require additional help

current "Load Modules:" says - snd_intel8x0 snd_intel8x0m 3c59x yenta_socket ssb

Just to be sure, what part do I need to add? what part do I need to remove?

Before I make any changes, lspci output read as bellow

00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
02:01.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:01.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)

Don't remove any modules.
3c59x is your ethernet module depends on yenta_socket and ssb.
The snd_intel8x0 snd_intel8x0m are for sound.
To get your wireless working follow this:
http://forum.slitaz.org/index.php/discussion/1229