Finally connected with wep. Dont use the ascii password only the hex value, eg if your password is say Welcome123 in the terminal type #iwconfig wlan0 or ra0 you will see the encryption/wep key as a string of numbers open use this.
Giving your wireless card a manual ip address helps, just because you can see networks/router does not mean you can connect example below your ip's may be different #ifconfig wlan0 192.168.1.5 netmask 255.255.255.0 #route add default gateway 192.168.1.1 ( normally your routers ip ) #ifconfig wlan0 up
This works for me, I have slitaz-3.0-xvesa.iso on a 4gb usb drive. Installed via unetbootin in Windows XP
Yes, mark. I also used hex key for testing wep but I generated it using my linksys router web interface. Then, just copy it to /etc/network.conf and restart.