For some reason i cannot get this device to work at in Slitaz

xircom rem56g-100
http://repositorio2.masoportunidades.com.ar/ARG01/14/116/1441502/fotos/1441502_3_2010827_0_16_16.jpg

So far i have tried compiling and installing the old "pcmcia-cs" so that i could grab the Module that makes my ethernet work (xirc2ps_cs). rebooted then Tried to load the module when i seen it wasnt running

removed that software because it never worked...

so I converted an old ubuntu7 "pcmcia-cs.deb" (exactly the same software, but pre~compiled) and installed it. Tried to load the module again but without luck.

i know that software is for the old 2.4.xx kernel


so, i booted up a kubutu 9.10 live cd i have only to find that it had loaded "pcmcia-CIS" (the modern equilvilent of the prebiously tried software) AND the "xirc2ps_cs" module to make my lan work.

I rebooted again, installed "pcmcia-cis-3.2.8" and tried to insert the old "xirc2ps_cs" module again without luck

Tried to wrap the windows driver with NDIS (yeah i know thats for wlan :P ) but that was just wasted time.

Outputs;

pccardctl ls

Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:03.0)
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:03.1)

-----

pccardctl info

PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255

-----

pccardctl status

Socket 0:
no card
Socket 1:
5.0V 16-bit PC Card

-----

lsmod

Module Size Used by Tainted: P
rtc 9136 0
ndiswrapper 154116 0
intel_agp 23032 1
agpgart 25980 1 intel_agp
option 19728 1
usbserial 25904 4 option
snd_nm256 63996 1
snd_ac97_codec 88736 1 snd_nm256
ac97_bus 1308 1 snd_ac97_codec
snd_pcm 51780 2 snd_nm256,snd_ac97_codec
snd_timer 16344 1 snd_pcm
snd_page_alloc 7256 1 snd_pcm
snd 43584 6 snd_nm256,snd_ac97_codec,snd_pcm,snd_timer
soundcore 5180 1 snd
yenta_socket 20988 1
rsrc_nonstatic 9136 1 yenta_socket
pcmcia_core 27628 2 yenta_socket,rsrc_nonstatic